With tesla model s lighting upgrade, you can ten times the brightness of your Model S, X, and Y Light.
This extremely bright led upgrade lighting kit will give your trunk and back cargo space a new level of brightness. We'll show you how to plug in bright light in this post.
Installation takes less than ten minutes and doesn't require any equipment. I purchased some replacement LED lights, and the installation procedure is as follows.
One on each door, get a blanket and get on all fours to inspect the placements.
There is a small recess to slide your tool under and one side appears to be simpler to take out than the other.
Use something more powerful to get into some of the clips because they could be a little harder to access.
Be cautious not to harm the materials of the door frame when you remove them; you may get a toolbox that is suitable for removing these.
The two tiny clips on either end of the LED enclosure are visible, and once they are removed, the wires hold the enclosure in place. The LED enclosure simply slips down.
The cable includes a clip that attaches to the light enclosure. To remove the cable, simply push down on it with your fingernail (or a pry tool) and pull it out. Reverse the installation procedure.
The only difference between these new LEDs and Tesla OEM LEDs is that they have up to 16 times the brightness.
Clip the new LED housing back into the door after re-entering the cables there. Once you've completed the initial step, the procedure is pretty easy.
Originally published by Will Fealey