Here are a few methods for resolving the partially secured Tesla charging wire issue:
- Download and set up the application.
- Check the charging cable's calibration.
- Perform a hard reset.
- Remove any debris that has become lodged in the port pin and charger.
- Arrange the charging cables correctly.
When the Tesla charging cable is not completely secured, try these fixes.
Try These Fixes When Tesla Charging Cable is Not Fully Secured
Update the software as Fix #1
Update the available software that causes this type of bug if the problem is BMS-related.
To do it, locate the accessible ones on the touchscreen Controls > Software and select the download button.
- Take your time finishing it.
- Next, open the Tesla app on your phone and select Software Update. Install it, then wait 2 to 4 hours for it to finish.
Resetting The Charging Cable (Fix # 2)
This type of problem frequently arises when the wall connector's internal mechanism has a problem. The charging wire is not completely secured to the mobile connector, so it cannot function properly. You might need to be aware of the reset process in that situation.
Remove the charging plug and the wall connector's outer shell to accomplish this.
- Most likely, a red indicator light will be flashing.
- Easily accessible red RESET button located on the left side of it.
Press on it for two to three seconds, or until the light turns green. In some circumstances, you might need to press and hold the RESET button for 5 seconds before letting go when the light turns green. This is how a Tesla charging cord can be reset.
3. Fix: Carry Out a Hard Reset
Tesla occasionally gets stuck or encounters a malfunction when it is unable to display the proper signal as a result of an internal system error. Thus, if the charging cable is not completely or fully secured issue a notice will appear in the app. To fix the bug, the automobile might need to be hard reset.
- Turn off the Tesla (Controls > Safety > Power Off) to accomplish this.
- Using the Tesla app, raise the front hood, and remove the top panel storage.
- Disconnect the negative terminal ground wire from the battery and remove the high-voltage loop plug.
- Let it stand in this position for 5 minutes.
- Connect the battery's ground wire after the high-voltage loop plug.
- Place everything back where it belongs.
Clean the Charging Connector & Port (Fix #4)
Yay, dirt can get inside the wall connector's pin insulator or the Tesla charging port, become stuck, and then grow. The greatest solution to the problem of a cable that is not completely secured is cleaning.
Clean the Charging Connector & Port (Source)
- Unplug the wall connector's charging connector.
- Use a torch to thoroughly examine the charging connector.
- Use a pipe brush cleaner, such as the CiaraQ bottle cleaning, if the inside is dirty. And twisting between the spaces will clean the pin insulator on the charging connector. Make sure to fill in each hole.
- After removing the Tesla charging port cover, look inside the vehicle's charging port below for damage.
- Wipe all the holes inside the charging port. with the same pipe brush cleaning.
Why Do We Need To Connect Charger Plug To The Charge Port Rightly?
Fix #5: Plug the charger into the charging port Rightly
The Tesla charge cord may not be plugged in properly, which would explain the same issue with the charging cable not being completely secured. You only need to check to see if the cable head is correctly placed into the charging device.
- Unplug the Tesla charge port's charge cable plug.
- Place it inside the port for charging and position the adapter on the plug correctly.
- Continue pressing until you hear a click-like shake, which denotes that the charging cable plug is properly and fully seated.
Examining the state of the charging connector pin insulator is crucial to guarantee a safe and dependable connection.
Why Does Tesla's Charging Cable Not Have a Complete Lock?
- The battery management system (BMS) has improved its sensitivity to improve charging more.
- The charging cable unit's system error causes a red light to flash.
- Error within the system.
- Debris around the charging port
- An improperly aligned charging cord.
Is Using an Extension Cord to Charge a Tesla Okay?
Both yes and no, I guess! Tesla advises owners against using an extension cord when charging their vehicles. If you can adhere to these guidelines and keep things clean, you may use an extension cord:
Get permission from the landowner if you intend to charge the car outside. You may need to move or extend your circuit to the location where you intend to charge the car. Make sure it has a unique wall connector installed close to the area where the cable can pass and charge the automobile without putting people in harm's way.
- Select a suitable cable size for the extension cord.
- Choose a suitable cable size for the extension cord to lessen the risk of an electrical fire. Recognize that the maximum power for the 120V automobile to charge at is 12A. It's because a bigger wire is needed for longer cords. Tesla's ideal cable configuration for the 12A is:
- 25–50 feet of 16–gauge wire;
- 100 feet of 14–gauge cable.
- A 150-foot cable that is 10 gauge wide.
- Check to see if the extension cord's power can support charging the vehicle. examining how much electricity the wall outlet can hold and transmit.
- Be aware that using an extension cord will slow down charging compared to using a different adapter or the original cord arrangement. In other words, your M3, MX, MY, or MS will charge slowly.
Opening the Charge Port:
To get started with the charging procedure, open Tesla's charge port.
clean the port and cable: Before connecting the device, thoroughly clean the charging port and the cable to ensure a strong connection.
Inspect the Charging Port: Carefully check the charging port for any damage or debris that would prevent it from charging properly.
Test with a Different Cable: To see if the issue is with the cable itself, try charging your Tesla with a different charging cable as part of your troubleshooting process.
Review and modify your Tesla's charge settings to streamline the charging process and maybe fix any charging cable problems.
Factors Affecting the Successful Resolution of Tesla Charging Cable Issues
The condition of the cable and port, the presence of any debris or damage, the compatibility of the cable with the Tesla model, and the accuracy of the charge settings are all variables that can affect how successfully Tesla charging cable issues are resolved.
The troubleshooting procedures that were taken, such as cleaning the port and cable or testing with a different cable, may also help to resolve the same problem again.