A Step-By-Step Guide To Jumpstarting A Tesla Model 3 And Y Battery

A Step-By-Step Guide To Jumpstarting A Tesla Model 3 And Y Battery

By Andrew Stephens

Owners of Tesla Model 3 and Model Y cars benefit from cutting-edge technology and an amazing electric range, but just like any other car, they occasionally experience battery problems. Electric vehicles (EVs) include a 12-volt battery that powers auxiliary systems like lights, entertainment, and more, even if their main propulsion battery doesn't need to be jumpstarted like conventional cars do. To resume driving, you'll need to jumpstart your Tesla if its 12-volt battery runs out. This is a comprehensive how-to for properly jumpstarting a Tesla Model 3 or Model Y.

Understanding Tesla’s Battery System

Understanding Tesla’s Battery System

Tesla’s battery system consists of two main components: the main battery and the 12-volt battery. The main battery powers the electric motor, while the 12-volt battery powers accessories and low-voltage systems. The battery pack provides energy to the electric motor and is made up of thousands of individual cells. Tesla’s battery system is designed to provide enough power to electric vehicles, but it’s not recommended that it be used to jump-start another car.

Preparing for a Jump Start

Make sure you have a portable jump starter or another vehicle with a 12-volt battery and jumper cables. Locate the 12-volt battery in your Tesla Model 3 or Y, which is usually found in the front trunk. Familiarize yourself with the electrical system and the location of the positive cable and negative cable. Check the owner’s manual for specific instructions on jump-starting your Tesla.

The Jump Start Process

Connect the positive cable to the positive terminal of the dead battery and the other end to the positive terminal of the good battery. Connect the negative cable to the negative terminal of the good battery and the other end to a metal surface on the dead vehicle. Start the working vehicle and let it run for a few minutes to charge the dead battery. Once the dead vehicle has enough power, start the engine and let it run for a few minutes to recharge the battery.

The Jump Start Process

Jump-Starting a Tesla vs. an ICE Car

Jump-starting a Tesla is different from jump-starting an internal combustion engine (ICE) car. Tesla’s electric motor is powered by the battery pack, whereas an ICE car has a starter motor that is powered by the battery. When jump-starting a Tesla, you need to be careful not to damage the electrical system or the battery pack.

1. Recognising the 12-Volt Battery in Your Tesla

The 12-Volt Battery: What Is It?

All of the electronics and auxiliary systems in your Tesla, such as the infotainment system and lights, are powered by a 12-volt battery. It is not connected to the high-voltage battery that runs the car's engine.

12-Volt Dead Battery Symptoms

Your 12-volt battery may require care if you have problems like an unresponsive touchscreen, error warnings on the dashboard, or trouble unlocking the doors.

2. Getting Ready to Launch

  1. Assemble Your Equipment

Make sure your portable jump starter has enough power to run a 12-volt battery before using it. Tesla advises utilizing a jump starter made specifically for automobiles.

Optional: Tesla Charging Kit You can also use a Tesla Charging Kit, if you have one, to temporarily charge the 12-volt battery.

  1. Prioritise safety

Go through the manual: For any special jumpstarting instructions or cautions, always consult the owner's manual for your Tesla.

Park Securely: Before beginning the jumpstart procedure, make sure the car is turned off and parked on a level area.

3. Finding the 12-Volt Battery to Jumpstart Your Tesla Model 3 or Model Y

Model 3: The front trunk, or trunk, houses the 12-volt battery. Remove the plastic cover covering the battery compartment and open the frunk to have access to it.

Model Y: Under the back trunk is where the 12-volt battery is situated. To reach the battery, open the trunk, raise the floor panel, and take off any covering or insulation.

Attach the jump starter.

Positive Terminal: Join the jump starter's positive (red) clamp to the 12-volt battery's positive terminal.

Negative Terminal: Securely fasten the black negative clamp to an appropriate ground location on the car. This could be a defined ground point, if one is available, or a metal component of the car's structure.

Turn the jump starter on.

Switch on the portable jump starter and let the 12-volt battery get charged by it. It can take a few minutes to complete this.

Verify Power

Once a few minutes have passed, try starting the car. If the 12-volt battery is fully charged, the touchscreen and other features ought to start working.

Cut Off and Go Away

After the car starts up, detach the jump starter gently by unplugging the negative (black) clamp first, then the positive (red) clamp.

After removing any covers or panels to see the 12-volt battery, replace them.

Troubleshooting Common Issues

If the dead vehicle doesn’t start, check the connections and make sure they are secure. If the vehicle still doesn’t start, check the battery pack and electrical system for any damage. If you’re having trouble jump-starting your Tesla, consult the owner’s manual or contact a professional mechanic.

Post-Jump Start Procedures

Once the dead vehicle has been jump-started, remove the jumper cables in the reverse order that they were attached. Let the vehicle run for a few minutes to recharge the battery. Check the electrical system and battery pack for any damage or issues.

Start the engine or charge the battery.

  • Drive the Car: To enable the high-voltage battery to replenish the 12-volt battery, try to drive the car for at least 30 minutes.
  • Charging Kit: To continuously charge the 12-volt battery, connect to your Tesla Charging Kit if you own one.

Check the Battery

Watch the dashboard and system of the car for any new problems. Should the issue continue, there can be a more significant problem with the battery or the charging mechanism.

Speak with Tesla Customer Service

Make an appointment for repairs or get in touch with Tesla customer service if you can't ignite your car or if you still have troubles. They can help you with any underlying issues.

5. Preventive Actions

Continual Upkeep

Check your 12-volt battery's condition on a regular basis and be aware of any warning indications. Regular maintenance and battery inspections can be done at Tesla's service centers.

Monitoring Battery Health

To keep an eye on the condition of your car's battery system, use the Tesla app. The app can notify you of any problems and give you information about the state of your battery.

Safety Precautions and Risks

Jump-starting a Tesla can be risky, so take precautions to avoid potential damage to the electrical system. Turn off both vehicles before attempting to jump-start the car to avoid an electrical short.

If the 12v battery of your electric car fails and the low-voltage power systems are affected, you might need to activate tow mode to safely transport the vehicle to a charging station or service center. Check voltage ratings and capacities of both batteries to ensure compatibility. Be aware of the potential risks of jump-starting a Tesla, including damage to the battery pack or electrical system.

Conclusion

Jump-starting a Tesla Model 3 or Y requires careful attention to safety precautions and the electrical system. By following these steps and taking the necessary precautions, you can safely revive your electric vehicle. Remember to always consult the owner’s manual and take necessary precautions to avoid damaging the battery pack or electrical system.

When done correctly, jump-starting the 12-volt battery of a Tesla Model 3 or Model Y is a simple procedure. You can easily restore your car to working order and keep making use of the advantages of electric driving by following these procedures. Always put safety first, and refer to your car's handbook for any detailed instructions or safety measures. You may confidently and easily handle a 12-volt battery issue with a little preparation and the correct tools.

Premium Dual Model Emblem Badge for All Teslas (5 Colors)
Premium Dual Model Emblem Badge for All Teslas (5 Colors)
€28,95
SHOP NOW
Plaid Emblem Trunk Badge Emblem for All Teslas
Plaid Emblem Trunk Badge Emblem for All Teslas
€28,95
SHOP NOW

Premium Dual Model Emblem Badge for All Teslas (5 Colors)
Premium Dual Model Emblem Badge for All Teslas (5 Colors)
€28,95
SHOP NOW
Plaid Emblem Trunk Badge Emblem for All Teslas
Plaid Emblem Trunk Badge Emblem for All Teslas
€28,95
SHOP NOW

Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


Pimp My EV Serves the whole EV industry with premium accessories
THE BIGGEST COLLECTION OF EV ACCESSORIES ON THE INTERNET!

Do you crave that one accessory that no one has? Do you need inspiration? Do you think your car is too plain and can use some TLC?

Pimp My EV offer premium accessories for all major EV brands.

Shop our aftermarket Tesla, Audi, BMW, Mercedes, Porsche and Ford accessories amongst others. High-quality modifications and accessories that accentuate style, function and appeal. Check the vast range of accessories by selecting your car brand.

If you have any questions about our electric vehicle accessories or modifications, reach out to us today via phone or email.

Contact us

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.