: 
: 
The Best Jack Pad Method for Lifting a Tesla (2024 Edition)
Care and accuracy are needed when lifting your Tesla for maintenance or repairs, especially considering the vehicle's sophisticated design and balanced weight distribution. One of the most important aspects of securely and damage-freely raising your Tesla is using jack pads. We'll go over the best methods for lifting your Tesla with jack pads in this 2024 tutorial so that you can do it safely and successfully.
Why Should You Use Jack Pads for Your Tesla?
To protect the battery and underbody of your car: Teslas have a small battery pack and delicate underbody parts. Jack pads offer a secure lifting point to prevent harm to these important regions.
Improved Stability: When your car is raised, jack pads help stabilize it, lowering the possibility that it will tip or move, which is important for safety when performing maintenance.
Ease of Use: Suitable jack pads made for Tesla automobiles make lifting easier and more accessible for both pros and do-it-yourselfers.
Selecting the Correct Jack Pads
1. Tesla-Specific Pads:
Make sure the jack pads you choose are made especially for Tesla automobiles. The optimal protection and fit are provided by these pads, which are designed to fit Tesla's special jack points.
2. Material Quality:
Use sturdy materials, such as foam or rubber, that can bear the weight of the car and act as a cushion to stop damage.
3. Compatibility:
Check if the jack pads work with the particular Tesla model you own, such as the Model S, Model X, Model Y, or Model 3.
How to Lift Your Tesla Using Jack Pads: A Step-by-Step Guide
1. Set Up Your Work Area:
Locate a level, sturdy place to raise your Tesla. Make sure everything is tidy and unobstructed. To keep the car from rolling, use wheel chocks.
2. Align the Jack Pads:
Find your Tesla's assigned jack spots. Usually, you can find these next to the wheel wells. Make sure the jack pads are properly positioned and fit snugly when inserting them into the jack points.
3. Raise the Car:
Front End: Position the jack pad beneath the front jack points of your Tesla if you plan to raise the front end. Lift the front end gradually and steadily with a hydraulic jack until the appropriate height is reached.
Rear End: Position the jack pads beneath the rear jack points to raise the rear. Once more, raise the back of the car using a hydraulic jack, making sure to raise it evenly to preserve stability.
4. Verify Stability:
After the automobile has been raised, make sure the car is properly supported by checking the jack pads' stability. If you intend to work underneath the car, you can utilize jack stands for extra safety.
5. Carry Out Maintenance:
Once your Tesla has been securely raised, you can carry out any necessary maintenance or repairs. Make sure you always abide by the correct safety procedures and protocols.
6. Bring the Car Down:
Release the Jack Gradually: When you're done, release the hydraulic jack gradually to gently lower the automobile. Before lowering the car all the way, remember to take off the jack pads.
Double-Check: Upon getting the car back on the ground, make sure that nothing is left underneath it and that everything is fastened firmly.
Extra Advice on Safe Lifting
Refer to the Owner's Manual: The owner's manual for your Tesla should always be consulted for detailed guidelines and advice on raising your car.
Use the Right Tools: Get jack stands and a high-quality hydraulic jack that is rated for the weight of your Tesla. Steer clear of utilizing cheap or improvised tools that could jeopardize safety.
Get Professional Assistance: You should think about getting professional help if you have any questions regarding the lifting procedure or if you feel uneasy doing maintenance on your own.
Routine Inspections: To make sure your jack pads and other lifting equipment are still in good operating order, check them frequently for wear or damage.
Safely Lifting Your Tesla with Jack Stand and Pads
When lifting your Tesla, using a jack pad and jack stand is essential for protecting your vehicle's lift points and ensuring stability. Before engaging the floor jack, ensure that the Tesla is in "Jack Mode" to prevent the "automatically self-levels system" from interfering, as Jack Mode automatically cancels the lift point. If your Tesla is equipped with an automatic braking feature, it may require you to disable, self-leveling function to prevent any issues.
For added safety, place the jack stands correctly under the jack pads to support the front and rear wheels while performing maintenance. While hockey pucks can be a cost-effective substitute for dedicated jack pads, ensure they are correctly located to avoid damage. Always check the brake pedal and charge cable positioning to prevent interference during the lift.
In summary
Lifting your Tesla with jack pads is a crucial step in carrying out maintenance and repairs securely. By following this 2024 guide, you can ensure that you use jack pads correctly, protecting your vehicle’s sensitive components and maintaining stability throughout the lifting process. When choosing a non-Tesla repair facility, ensure that the technicians have experience with electric vehicles and are familiar with Tesla's unique components and systems.
Always prioritize safety, use the right equipment, and consult your owner’s manual for specific guidance related to your Tesla model. With these best practices, you can handle lifting your Tesla with confidence and care.
